Combination Slide Safety Fence Specifications
Combination slide safety fence specifications
The combined slides shall be provided with safety fences to prevent children from climbing, crossing and falling, and the protective fences shall meet the relevant regulations of GB-8408. For combined slides where young children can easily enter, when the platform height is higher than 500 mm, a fence should be installed. For combined slides that are difficult for young children to enter, fences should be installed when the platform height is higher than 1,000 mm.
According to regulations, except for necessary entrances and exits, protective fences should be installed around the platform. If there is no guardrail across the exit, the maximum width of the entrance and exit of the fence should be less than or equal to 500 mm. If there is a guardrail across the exit, the width of the entrance and exit of the fence can be greater than 500 mm, but should be less than or equal to 1 200 mm. If the fence has guardrails leading to steep climbing equipment, the maximum width of the guardrail opening should be less than or equal to 1,200 mm. As for ladders, slopes and bridge aisles, since this type of equipment has its own fence, the entrance and exit width of the fence should not be greater than the exit width of the above components. The height of the fence on the platform, ladder and slope should not be less than 700 mm. The cross-sectional dimensions of the fence or guardrail shall meet the specified holding requirements or specified holding requirements.