Inflatable Castle Installation Tips

Inflatable castle installation tips

Now children's paradise is more and more, many parents began to grow more and more concerned about the health of children, can be clearly seen in the amusement park children's favorite play is the inflatable castle, today and Xiao Bian together Check out the little knowledge of installing an inflatable castle!

First, children's water slide installation method:

First of all, find a flat ground, clean up the stones, broken glass and other sharp objects on the ground to prevent punctured products.

2. Put a carpet (or PVC cloth, or colored cloth) on the ground, and then place the packaged gas mold in the center of the ground.

3. Gas-mode packaging, should not use sharp tools such as blades to unpack, to prevent accidentally zoned to the package of products, you can use the scissors to pick on the bag on the sewing slowly, and then ripped the needle at the mouth of the packaging that can.

4. After unpacking, slowly expand all parts of the mold to the surrounding area until all parts are flattened to the ground.

5. Locate the blower port above the blow mold, tie the blower blower port with the blower port on the blow mold, and then prepare the power cord.

6. The fan connected to the power, open the switch, the fan began to inflatable gas, 5-10 minutes, the gas will be completely blown upright. Check the four weeks after the correct, children can go play.